High Speed Plastic Sheet Extrusion Line provides the maximized output at 1200kg/hr for PET material and 900kg/hr for PP material. The drive system is torque 1,000rpm servo motor with hallow shaft design for screw extraction from back side. The IR ceramic heaters with air blowers are regular heating elements.
After many modifications and improvements the performance is reliable now. It could get energy saving, high output, flatness, gloss surfaces, less internal stress and high transparency PP sheet than regular extruder.
|PET/PP High Speed Plastic Sheet Extrusion Line
|PP, PET and Other Rigid Sheet Polymers
|IR Ceramic Efficient for Energy Saving, ~0.26 kWh per kilo Power Consumption
|Single Extrusion Mono Layer or Co-extrusion Multi Layers
|Sheet Cut, Reel Wind, In-line with Thermoforming Machine
|PP: 0.3 mm ~ 2 mm, PET: 0.15 mm~1.2 mm
|500 ~ 1,600 mm
|Maximum Screw Revolution
|900 kg / h +/- 10% for PP, 1200 kg / h +/- 10% for PET
|Up to 60 M/Min.
|Cooling Rolls Stack.
|Down stack or Up stack configuration, Vertical, Inclined or Horizontal, J Type, 3rd Roll Rotating type & Multiple Contact type for High Performance Requirements
|Razor Blades, Rotating Blades
|Fixed Shaft, Cantilever, Automatic Cut and changeover Turret Winder
|CMG Drive with Hollow Shaft Design for Screw Extraction from Back Side